Holladay Foundation Pros logoHolladay Foundation ProsFoundation Repair · Holladay, UT
Menu
basement waterproofing in Holladay, UT

Holladay Foundation Pros

Basement Waterproofing in Holladay, UT

Basement waterproofing in Holladay with interior drain tile, sump pump systems, and wall sealing to stop spring snowmelt water intrusion.

Serving Holladay and nearby communities.

Full basements are standard across Holladay, and spring snowmelt along the Wasatch Front is a recurring reason those basements take on water. Basement waterproofing from Holladay Foundation Pros addresses the moisture itself, interior drain tile, sump pump systems, and wall sealing, separate from wall stabilization, which addresses structural bowing caused by the pressure behind the wall.

Many of these jobs pair naturally: a bench-lot home with clay-heavy soil holding water against the foundation longer than sandier sections nearby may need both a dry basement and a stabilized wall. Holladay Foundation Pros walks through both during the same estimate so you're not getting two separate diagnoses from two separate companies.

What's included

What's included with Basement Waterproofing

Typically included: moisture source inspection, interior drain tile along the affected perimeter, sump pump installation or tie-in, wall sealing. Optional: battery backup pump, exterior grading correction, check valve replacement on an existing system. Customer prep: clear basement storage away from walls, note any areas where water has pooled after rain or snowmelt.

How it works

How our Basement Waterproofing process works

  1. Moisture Assessment photo
    Step 1

    Moisture Assessment

    The basement is inspected for leaks, dampness, and water entry points.

  2. Drainage Evaluation photo
    Step 2

    Drainage Evaluation

    Existing drainage systems are reviewed for effectiveness and blockages.

  3. Interior Drain Installation photo
    Step 3

    Interior Drain Installation

    A drainage channel is installed along the basement perimeter to collect water.

  4. Sump Pump Setup photo
    Step 4

    Sump Pump Setup

    A pump system is installed to remove collected water from the area.

  5. Wall Sealing photo
    Step 5

    Wall Sealing

    Walls are treated with waterproof coatings to prevent moisture intrusion.

  6. System Testing photo
    Step 6

    System Testing

    The waterproofing system is tested to verify proper function.

Materials

Materials and methods for Basement Waterproofing

These systems are matched to the amount of water a Holladay basement sees during spring runoff.

  • Interior Drain Tile photo

    Interior Drain Tile

    Channels water to a collection point before it reaches living spaces, built to handle seasonal snowmelt volume.

  • Sump Pump System photo

    Sump Pump System

    Removes accumulated water to keep the basement dry through heavy runoff periods.

  • Waterproof Wall Coating photo

    Waterproof Wall Coating

    Creates a barrier against moisture penetration through basement walls facing clay-heavy soil.

  • Vapor Barrier Sheeting photo

    Vapor Barrier Sheeting

    Reduces humidity transfer from soil into the basement space year-round.

  • Check Valve photo

    Check Valve

    Prevents discharged water from flowing back into the system during pump cycling.

  • Battery Backup Pump photo

    Battery Backup Pump

    Keeps the system running during power outages, common during spring storms.

Cost

What does basement waterproofing cost in Holladay?

Pricing depends on linear footage of wall needing drainage and whether a sump pump needs to be added or replaced. A free estimate gives you an exact number for your basement.

Project typeTypical rangeWhat’s included
Spot wall sealing$500–$1,500isolated damp areas without a full drainage system.
Interior drain tile section$2,500–$6,000partial perimeter drainage with sump tie-in.
Full perimeter system$6,000–$12,000complete interior drain tile and sump pump install.
Sump pump upgrade$800–$2,000pump replacement with battery backup added.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Timeline

How long does basement waterproofing take?

  1. 01

    Stage 1

    a few days

    A typical waterproofing job runs over one to depending on how much perimeter needs drain tile.

  2. 02

    Consult and inspection

    same day

    moisture source and drainage review.

  3. 03

    Drain tile install

    1–2 days

    trenching and perimeter drain placement.

  4. 04

    Sump pump setup

    same day

    pump install and tie-in to the drain system.

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and codes for Basement Waterproofing

Check with Salt Lake County before exterior work, especially on older annexed properties with county-era permit records.

Typically needs a permitOften no permit
Exterior excavation near the foundation wallInterior drain tile installation
Structural changes to accommodate drainage workSump pump install or replacement
New sump discharge line routed to a city storm connectionWall sealant and vapor barrier application

DIY vs pro

DIY vs hiring a pro for Basement Waterproofing

DIYHire a pro
Waterproof paint on small damp spots without active water intrusionAny case with standing water or recurring dampness after snowmelt, since sealant paint stops surface moisture but won't relieve the hydrostatic pressure building behind the wall that drain tile is designed to handle
Clearing gutters and downspouts to reduce surface water near the foundationSump pump installation and tie-in
Monitoring humidity levels with a basement dehumidifierInterior drain tile trenching

When to call

When to call for Basement Waterproofing

Call for a free estimate if you're seeing any of these signs before they turn into a bigger repair.

  • Standing water in the basement after spring snowmelt
  • Musty smell that doesn't clear with ventilation
  • White chalky efflorescence building up on basement walls
  • A sump pump that runs constantly or not at all

FAQs

Basement Waterproofing FAQs

How much does basement waterproofing cost in Holladay?

Most jobs run from a few hundred dollars for spot sealing to around $12,000 for a full perimeter drain tile and sump pump system, depending on linear footage.

Should I get a French drain or interior waterproofing first?

Interior waterproofing addresses water that's already reaching your basement. French drains intercept groundwater before it gets near the foundation. Many homes benefit from both, and we can tell you which to prioritize during the estimate.

How long does basement waterproofing take?

A full interior system usually takes one to a few days from drain tile install through sump pump setup and testing.

Do I need a permit for basement waterproofing?

Interior work like drain tile and sump pumps usually doesn't need a permit. Exterior excavation near the foundation may require Salt Lake County review.

Is DIY waterproofing paint enough to fix a wet basement?

Paint can stop minor surface dampness but won't stop active water intrusion caused by hydrostatic pressure. If you're seeing standing water or recurring moisture, you need a drainage system, not just a coating.

What causes hydrostatic pressure against my basement wall?

Saturated soil from spring snowmelt pushes against basement walls. Clay-heavy soil on some Holladay bench lots holds that water longer, which increases pressure over time.

Next step

Get a Basement Waterproofing estimate in Holladay

Call (435) 691-6716 or request a free estimate to get your basement dry before the next snowmelt cycle.

---

Ask about Basement Waterproofing

Tell us about the project and how to reach you.

Call (435) 691-6716